|
|
|
|
Recently, we added a Kranendonk Robot Profile Cutter to the
Cutting Edge Metal Processing facility. We can burn with plasma
or oxy-fuel. The robot can cut flatbar, bulbflat, angel,
channel, I-beam, and T-Beam. While the robot is making the cut
it can cut out the holes in structural member (intermediate
cut), perform endcuts, and the inkjet marker labels material
with part number. This state of the art assembly line is fully
automated and automatic from the infeed through the outfeed
system.
185-ton GEKA Ironworker
This machine is capable of cutting angle up to 8” x 8” x ¾”,
punching a 1-9/16” hole in a piece of 1-1/4” MS plate, and
cutting round and square bar up to 2-7/8”
across. It is also the only ironworker in the U.S. currently
known to cut European Bulb Flat. Special copes and snipe that
cannot be cut by the GEKA are moved forward to a burning table
and cut with a Plasma or oxy fuel hand torch.